Diabolo Socket tool 锁铃器

【Product Specification】

• For bearing diabolo, you'll only need 1pc socket tool to tighten, one side at a time
• For fixed diabolo, like EVO G1/MHD-pro which has two screw nuts, you'll need 2 pcs to tighten both sides together
• Function Tightening, loosening & adjusting the screws of diabolo
• Very useful for those who play Sundia Diabolo very frequently
• Using the socket to tightening the screws will make your Sundia diabolo more sustainable
• Although the screws of the diabolo itself are quipped with anti-loosening components, it is still possible to be loosened after a long time of play. This phenomenon is normal. The loosened screws will cause the diabolo to have an unsteady trembling. Please check your diabolo condition before your performance or competition starts
• Attention: Tightening the Sundia bearing-axle diabolo series by leaving a little gap (If it is too tight, the bearing-axle will become fixed-axle)

【产品介绍】

• 培铃仅需一支即可，一次锁紧一边，再锁另一边。
• 定轴只有EVO实色/MHD-pro 会用上2支，两边同时转紧
• 功能: 锁紧、放松以及调整三铃扯铃的螺丝
• 对于时常使用三铃扯铃的玩家非常有用
• 使用锁铃器锁紧螺丝将延长扯铃寿命
• 虽然扯铃本身的螺丝有防松脱 垫片，但是在长时间的抛摔下还是有可能造成螺丝松脱的问题。这是正常现象。螺丝松脱会造成扯铃有不稳定的抖动。请在表演或者比赛前检查您的扯铃情况
• 注意事项：当锁紧三铃培铃系列的扯铃时，需要留一点间隙 (锁得太紧的话，培铃就会变成定轴）