【Sundia 三铃】Diabolo LED kit 铃灯光组

【Product Specification】

• Rechargeable type,with charging indicator light.
• LED light kit only, diabolo not included, 
• Two LEDs per kit
• You can install on various type of diabolo eg, shining/Falcon/ECHO etc.
• 3 operating modes
  • Press button 1st time(hold longer), all blue & white LED glow
  • Press button 2nd time , only white LED glows
  • Press button 3rd time, only blue LED glows
  • Press button 4th time, turn off all LEDs
• Cable type: USB Type C
• Please use Type-C plug but not use fast charger
• Including semi-nuts for bearing diabolo installation use, if you're installing on fixed axle type diabolo, pls purchase additional carbon round washer
• Made in Taiwan
• Attention: 

1. 1. You can lock the LED to the diabolo directly by hand. NO tools are required. 
   2. If the LED is not needed, you can remove it and lock the diabolo using the original screws from Sundia Company.
   3. There is a white button on the LED kit for turning on/off the light and changing the lighting mode.
   4. This white button has an anti-mispressing function, so you may need to make the first long press to switch it on officially. 
   5. This light has a low battery warning flashing. When the LED kit starts to flash abnormally, it means that the LED has low battery power. At this time, please turn off the light and plug in the charger. 
   6. RED light indicates CHARGING whereas BLUE light indicates the charging is COMPLETED.
   7. Be careful not to squeeze the bulb when removing the package.

【产品介绍】

• 可充电式，备有充电指示灯
• 超酷炫超亮的Sundia充电式灯光组
• 不包括扯铃
• 一组两颗
• 可搭配多种款式扯铃（价格另计），如炫风铃，猎鹰铃，EVO G3，ECHO椰果铃，无论定轴培铃皆可安装！
• 3种亮灯模式：
  • 按钮按第一下（长按），蓝白光全亮
  • 按钮按第二下，仅白光亮
  • 按钮按第三下，仅蓝光亮
  • 按钮按第四下，关灯
• 充电线类型: USB Type C
• 使用Type-C充电头，请勿使用快充！
• 附送薄螺丝，用于培铃安装。如要安装在定轴铃,需要另外购买碳片垫在下方
• 台湾制作
• 注意事项：

1. 1. 可以用手直接将LED锁紧在扯铃上。无需任何工具。
   2. 不需要LED的时候，可以转下LED后，直接锁回原厂螺丝。
   3. LED灯组上有一个白色的按钮。这个按钮是用来打开/关闭灯光，以及切换灯亮模式。
   4. 这个白色的按钮有防误压装置，所以第一下要长按才会正式开启。
   5. 此灯光有低电量警示闪烁。当灯光组开始不正常闪烁时，代表灯光组电力不足了。此时请确保您已经关闭了灯光，并插上了充电器。
   6. 红灯显示充电，而蓝灯显示充电完成了。
   7. 请小心拆装，切记不可挤压到灯泡。

组装教学-定轴铃 Assembly tutorial-Fixed axle diabolo

组装教学-培铃 Assembly tutorial-Bearing axle diabolo